An audiometric exam measures hearing sensitivity across different frequencies and records the findings on an audiogram. Understanding the report involves looking at hearing thresholds, comparing the two ears and examining the overall pattern rather than focusing on a single number.
The results can initially appear complicated because the report may contain symbols, frequencies, decibel values and findings from several different tests. Each part provides specific information about how the auditory system responded during the assessment. Audiologists generally interpret the findings alongside symptoms, hearing history, and other audiological assessments.
This guide focuses on interpreting the information commonly found in an audiometric report, understanding normal and abnormal findings, and knowing what may happen after the results are reviewed.
Understanding Your Audiometric Report
An audiometric exam report records measurements obtained during a hearing assessment. Pure tone thresholds are commonly displayed on an audiogram, while results from speech testing, tympanometry or other procedures may appear separately.
The report provides objective hearing information. It should still be interpreted alongside the reason for testing. Someone experiencing difficulty understanding conversations, for example, may need their pure tone and speech findings considered together.
The audiologist's explanation is therefore an important part of the assessment.
Start With the Audiogram
The audiogram is usually the most recognisable part of an audiometric report. It is a graph showing the lowest sound levels detected at different frequencies for each ear.
Frequency appears horizontally, while hearing level appears vertically. Once these two axes are understood, the overall hearing pattern becomes easier to follow.
Frequency: Understanding the Horizontal Axis
Frequency describes the pitch of a sound and is measured in hertz, or Hz. Lower frequencies appear towards the left side of the audiogram. Higher frequencies appear towards the right.
Lower-frequency sounds have a deeper pitch, while higher-frequency sounds have a sharper or higher pitch. Testing several frequencies is important because hearing changes do not always affect every pitch equally.
A person may hear lower-frequency sounds relatively well while requiring substantially stronger sound levels to detect higher frequencies.
Hearing Level: Understanding the Vertical Axis
The vertical axis shows hearing level in decibels hearing level, usually written as dB HL. Softer levels appear towards the top of the graph, while progressively higher sound levels appear further down.
This means a threshold plotted further down the audiogram represents a sound that needed to be stronger before it could be detected. The direction can initially seem unusual because many graphs associate higher positions with larger values.
With an audiogram, however, thresholds closer to the top generally represent better hearing sensitivity than thresholds substantially further down.
What Is a Hearing Threshold?
A hearing threshold is the lowest sound level at which a person reliably responds to a particular test frequency. During pure tone audiometry, the audiologist adjusts sound intensity until this threshold can be established.
The process is repeated across several frequencies for both ears. These thresholds form the individual points plotted on the audiogram.
The complete pattern is more informative than any single threshold because hearing sensitivity can vary across frequencies.
Understanding Right- and Left-Ear Results
Each ear is usually assessed separately during an audiometric examination. Different symbols are used to distinguish the results for the right and left ears and to show whether testing was performed through air or bone conduction.
Your audiologist can identify the symbols used on your particular report. The important point is that separate results allow the clinician to compare hearing between the ears.
Why Differences Between the Ears Matter
Hearing does not always change equally on both sides. One ear may have poorer thresholds at certain frequencies while the other remains relatively better.
A difference between the ears does not automatically indicate a particular condition. Its significance depends on the degree of asymmetry, the frequencies involved, associated symptoms and other clinical findings.
An audiologist determines whether the difference is meaningful enough to require monitoring or further evaluation.
Air-Conduction and Bone-Conduction Results
Audiometric reports may contain both air- and bone-conduction thresholds. These measurements examine hearing through different pathways and help the audiologist characterise the type of hearing change.
Air-conduction testing uses headphones or earphones. Sound travels through the outer ear, middle ear and inner ear. Bone-conduction testing uses vibration to stimulate the inner ear while reducing the influence of the outer and middle ear.
Comparing these results can provide information about where a hearing difficulty may be occurring within the auditory pathway.
What Is an Air-Bone Gap?
An air-bone gap refers to a clinically relevant difference between air- and bone-conduction thresholds. When bone-conduction hearing is better than air-conduction hearing by a meaningful amount, a conductive component may be present.
This suggests that transmission through the outer or middle ear may be affecting the overall hearing result. However, patients should not use an apparent air-bone gap to diagnose an ear condition themselves.
The audiologist needs to determine whether the difference is clinically significant and how it relates to the rest of the assessment.
Normal vs Abnormal Audiometric Results
Audiologists interpret hearing thresholds using recognised clinical ranges while also considering the complete hearing profile. A result may indicate hearing sensitivity within an expected range or show a measurable degree of hearing loss.
However, "normal" and "abnormal" should not be interpreted too simplistically. A person whose pure tone thresholds are relatively good may still report difficulty in complex listening environments, particularly when background noise is present.
Likewise, the practical impact of measurable hearing loss can vary considerably between individuals.
Understanding Hearing Loss Severity
Audiometric reports may describe hearing loss using categories such as mild, moderate, severe or profound. These terms broadly describe how much sound intensity is required before tones are detected.
The exact classification conventions used can vary, so the audiologist's interpretation should take priority over attempting to assign a category independently.
More importantly, severity does not provide a complete description of communication ability.
Someone with a relatively mild threshold change may experience substantial difficulty in demanding listening environments, while another person with a similar audiogram may report different challenges.
The audiogram measures hearing sensitivity, not every aspect of real-world listening.
Common Hearing Loss Patterns
Audiometric interpretation involves examining both the degree and configuration of hearing thresholds. The configuration describes how hearing changes across frequencies.
Some patterns are relatively flat, while others slope towards poorer thresholds at higher or lower frequencies. The pattern can provide clinically useful information, but it should not be treated as a diagnosis by itself.
High-Frequency Hearing Loss Pattern
A high-frequency hearing loss pattern occurs when thresholds are poorer at higher frequencies than at lower frequencies.This can affect the clarity of speech because important speech information occurs across the higher-frequency range.
People with this pattern may describe hearing that someone is talking but have difficulty distinguishing particular words. Difficulty can become more noticeable when background noise is present.
Low-Frequency Hearing Loss Pattern
Some audiograms show poorer thresholds in lower frequencies while higher-frequency sensitivity is relatively better. This creates a different configuration from the more familiar high-frequency slope.
The audiogram alone does not determine why this pattern has occurred. The audiologist may consider associated symptoms and other test findings when determining whether additional evaluation is appropriate.
Flat Hearing Loss Pattern
A relatively flat configuration means hearing thresholds are broadly similar across much of the tested frequency range. The degree of hearing loss can still vary substantially between individuals with flat audiograms.
One person may have a relatively mild reduction across frequencies, while another may have much poorer thresholds. The configuration describes the shape rather than the overall severity.
Asymmetrical Hearing Pattern
An asymmetrical pattern occurs when hearing thresholds differ meaningfully between the ears. The difference may involve particular frequencies or a broader portion of the audiogram.
Because people listen with both ears during everyday communication, asymmetry may not always be immediately obvious. The better-hearing ear can sometimes compensate in certain situations.
Audiologists consider the degree of difference and associated symptoms when deciding whether additional investigation may be appropriate.
Conductive Hearing Loss on an Audiometric Report
Conductive hearing loss occurs when sound transmission through the outer or middle ear is reduced. On an audiometric report, bone-conduction thresholds may be better than air-conduction thresholds, producing a clinically relevant air-bone gap.
The exact pattern depends on the condition and frequencies affected.Audiometry can identify that a conductive component appears to be present, but it does not necessarily identify the precise medical cause.
Additional ear or medical evaluation may therefore be required.
Sensorineural Hearing Loss on an Audiometric Report
Sensorineural hearing loss involves changes affecting the inner ear or auditory pathways. Air- and bone-conduction thresholds are generally reduced to a similar degree without a clinically significant conductive gap.
The pattern can affect different frequencies and can range considerably in severity. Audiological testing helps characterise the hearing change, while the patient's history and any necessary medical evaluation contribute to understanding its possible cause.
Mixed Hearing Loss on an Audiometric Report
Mixed hearing loss contains both sensorineural and conductive components. Bone-conduction thresholds show reduced inner-ear hearing sensitivity, while air-conduction thresholds demonstrate an additional conductive component.
This produces a more complex audiometric pattern. Management depends on the underlying findings, symptoms and whether medical treatment, hearing rehabilitation or both may be appropriate.
Understanding Speech Audiometry Results
An audiometric exam may include speech testing in addition to pure tones. Speech audiometry examines aspects of hearing using spoken material under controlled conditions.
Depending on the procedure, the report may include information about speech detection or recognition. These results provide a different perspective from pure tone thresholds because everyday communication depends on processing speech rather than simply detecting tones.
Why Speech Results May Differ From Everyday Experience
A person can perform reasonably well during speech testing in a quiet clinical environment while still struggling in restaurants, meetings or group conversations.
Real-world listening introduces competing voices, background noise, distance and visual distractions. Speech-test results should therefore be interpreted as one part of the overall assessment.
Your description of everyday communication remains important even when formal test results appear relatively favourable.
Understanding Tympanometry Results
Tympanometry assesses aspects of middle-ear function rather than directly measuring hearing thresholds. The test records how the eardrum and middle-ear system respond as air pressure in the ear canal changes.
Results are commonly displayed as a tympanogram. The audiologist interprets the shape and measurements according to the testing conditions and clinical context.
An unusual tympanometry result may provide information about middle-ear function, but it should not be used independently to diagnose a specific condition.
Why Audiometric Results Need Professional Interpretation
Audiometric reports contain multiple pieces of information that need to be considered together.
A single threshold, symbol or test result rarely provides enough information to determine the complete hearing picture.
The audiologist considers:
- Hearing thresholds across frequencies
- Differences between the two ears
- Air- and bone-conduction relationships
- Speech-test findings where available
- Middle-ear findings and reported symptoms
This integrated interpretation is more reliable than attempting to diagnose hearing problems from an audiogram found online or comparing individual numbers without clinical context.
What Happens If Your Results Show Hearing Loss?
Finding hearing loss does not automatically mean that the same treatment is appropriate for everyone. The next step depends on the type and degree of hearing change, communication difficulties and whether any findings require further investigation.
Some people may require periodic monitoring. Others may benefit from hearing rehabilitation, communication strategies or hearing aid evaluation.
What If Your Results Appear Normal but You Still Struggle to Hear?
Pure tone audiometry measures the detection of controlled tones and does not capture every aspect of auditory function or real-world communication. A person may still report difficulty understanding speech in noisy or complex environments even when routine thresholds appear relatively good.
These concerns should be discussed with the audiologist rather than dismissed solely because an audiogram appears satisfactory. The clinician can consider whether additional assessment, monitoring or communication guidance may be appropriate.
Comparing Current and Previous Audiometric Results
Previous audiograms can be valuable when monitoring hearing over time. Comparing reports allows the audiologist to determine whether thresholds appear stable or whether meaningful changes have occurred.
Small differences between tests do not necessarily represent a significant deterioration. Testing conditions, patient responses and normal measurement variability can influence individual thresholds.
The audiologist determines whether changes across assessments are clinically relevant.
Questions to Ask When Reviewing Your Results
An audiometric report becomes more useful when you understand how the findings relate to your daily hearing. Consider asking your audiologist:
- What is the overall pattern of my hearing?
- Are there meaningful differences between my ears?
- Which frequencies are most affected?
- What do my speech results show?
- Do I need monitoring, additional assessment or medical evaluation?
- How might these findings affect everyday communication?
These questions focus the discussion on practical interpretation rather than simply receiving a technical report.
Frequently Asked Questions
An audiometric exam shows hearing thresholds across selected frequencies for each ear. Additional results may provide information about speech hearing or middle-ear function depending on the tests performed.
dB HL stands for decibels hearing level. It is the measurement scale commonly used on an audiogram to record hearing thresholds.
Points further down the audiogram indicate that a stronger sound level was required before the tone could be detected at that frequency.
Air conduction assesses hearing through the outer, middle and inner ear, while bone conduction reduces the contribution of the outer and middle ear. Comparing them helps characterise the hearing-loss pattern.
Not necessarily. Hearing-loss categories describe threshold measurements, while everyday communication also depends on speech clarity, background noise and individual listening requirements.
It can identify the type and pattern of hearing loss but may not establish the exact medical cause. Additional evaluation may be needed depending on symptoms and findings.
Small variations can occur between assessments. An audiologist can determine whether the difference is within expected measurement variation or represents a meaningful hearing change.
Discuss the complete findings with your audiologist. The appropriate next step may involve monitoring, additional audiological testing, hearing rehabilitation or medical evaluation depending on the pattern and symptoms.
Turning Your Audiometric Report Into Practical Information
Audiometric exam results are most useful when the measurements are connected with the person's actual communication experiences.
The audiogram shows hearing thresholds across frequencies, while air- and bone-conduction relationships help characterise the hearing pattern. Speech testing and middle-ear assessment can provide additional information when included.
Terms such as mild, moderate, conductive or sensorineural describe particular aspects of the findings, but none should be interpreted in isolation.
The purpose of reviewing the report is not simply to assign a hearing-loss category. It is to understand what the results indicate, whether the ears differ, how the findings relate to everyday hearing and what next step may be appropriate.
Review Your Hearing Results with Ear Balance
If you have concerns about your hearing or need help understanding audiometric findings, Ear Balance provides hearing diagnostic services in Singapore. Reach out to us to have your hearing assessed and discuss what the results may mean for your hearing.